Hello, welcome to the official website of Chongqing Tengcheng Machinery Manufacturing Co., Ltd!
Hotline: +86-13527391290 +86-18983833666
TENGCHENG MACHINERY
News
All Categories >
Maintenance of wheel hub
2022-05-25 12:49
When the wheel surface is difficult to remove stains, to choose a professional cleaning agent, this cleaning agent is often able to gently and effectively remove stains, reduce the damage to the aluminum alloy surface. In addition, the wheel itself has a layer of metal maintenance film, so pay special attention to the use of paint brighteners or other abrasive materials. In the process of driving, we should also be careful to avoid "hard injury" caused by scratching the wheel hub. Once there are scratches or deformation, it should be repaired and repainted as soon as possible. To avoid this phenomenon, the car should be diligent in washing the rims when it is new, and the car driven every day should be washed at least every week.
VIEW MORE
05
2022-05
The rim, commonly known as the rim, is a component that installs and supports the tire on the periphery of the wheel, and forms the wheel with the spokes. The rim and spokes may be integral, permanently attached or removable. The hub is a rotating component that connects the wheel and the axle and is responsible for bearing the load between the tire and the axle. The classification of automobile rims is as follows: 1. Deep groove rim: This kind of rim is a whole, and the middle of its section is a deep groove. A flange with a shoulder is used to place the bead of the tire. The shoulder is usually slightly inclined to the middle, and the inclination angle is generally 4 to 6 degrees. The large diameter of the inclined part is called the tire bead and the rim. The diameter of the engagement. The middle of the section is made deep
05
2022-05
The difference between rim and hub
The difference between the rim and the wheel hub is that the rim is the part where the tire is fixedly installed on the wheel, and the wheel hub is the rotating part that connects the wheel and the axle, and is responsible for bearing the load between the tire and the axle. The rim is a part of the wheel hub, which refers to the part in contact with the tire., The wheel is the wheel as usual. The wheel hub is the middle part of the car wheel, that is, the tire is removed. The metal parts in the middle are generally made of aluminum alloy. Our common wheels are all integrated. In a professional description, they are divided into three parts. They are rims, spokes, and discs. This is just a name given to facilitate production in the production process.
05
2022-05
The rim of a car, the part of the edge around the wheel. The rim, commonly known as the rim, is the part where the tire is installed around the wheel. When in use, the rim specification of the car is very important. It determines which tires the car can be fitted. The general forms of rims are mainly deep groove rims and flat bottom rims, in addition to open rims, semi-deep groove rims, etc. Deep groove rims are used for cars and light off-road vehicles; flat-bottom rims are used for medium-sized trucks. Open rims are used for medium and heavy off-road vehicles. 1. Deep groove rim: The rim is integrated with a deep groove in the middle of the section. It is mainly used for cars and light off-road vehicles. There is a shoulder flange for placing the outer tire bead, the shoulder is usually slightly facing
05
2022-05
What type of rim is usually used in cars?
What kind of rim is usually used in cars? There are two common ways of rims: deep-groove rims and flat-bottom rims. In addition, there are also split rims and half-groove rims. Deep groove rims are used for cars and light off-road vehicles; flat bottom rims are used for medium trucks; and split rims are used for heavy off-road vehicles. Deep groove rim: this kind of rim is integral, its cross-section in the middle of a deep concave groove, suitable for cars and light off-road vehicles. It has a shouldered boss for placing the bead of the tire. Its shoulder is usually slightly skewed to the middle, and its inclination is generally 5 degrees. The largest diameter of the skew is called the tire bead.
05
2022-05
Off-road vehicle rim modification matters needing attention
For an off-road vehicle, if you want to use low cost to improve the passing capacity, then choose to replace the tire rim is definitely a wise choice. Since we have made a detailed interpretation of the tire modification part in the previous article, today we will talk about the matters needing attention in the modification of off-road vehicle rims. First of all, we must clarify a question: Why do we need to modify the rim? I: Lightweight As we all know, most of the original rims of off-road vehicles are subject to the cost. Although the overall strength is good, the weight is really not flattering. The unsprung mass as the influence vehicle dynamic response capability
05
2022-05
Matters needing attention in purchasing modified wheels
1. The mounting surface of the wheel hub screw: there are spherical, conical and flat surfaces. The joint surface of the original car's hub and screw is mostly spherical, while the modified wheel hub uses a conical surface because of the difficulty of processing. The screw must be replaced. The screws are mostly used on large cars, and cars are rare. 2. Wheel fixing screws The hardness of the fixing screws of the original car with normal design is not high, and it must be much lower than the hardness of the screw post or screw hole. The purpose of this is not to damage the wheel hub, brake disc or brake drum during brutal disassembly and assembly. The thread makes it scrapped prematurely. And some modified screws use high hardness of stainless steel materials, especially the six-party demolition
09
2022-04
Motorcycle wheel tire knowledge: aluminum wheels & vacuum tires, spoke wheels and ordinary tires
This problem is often paid more attention to by novices. Strictly speaking, there is no better or worse model, because different models have different needs; in other words, different models are very different for the road surface, and different The road is suitable for different types of wheel tire combinations.
09
2022-04
What are the differences in the use of motorcycle spoke wheels and aluminum alloy wheels?
Motorcycle wheels are mainly composed of tires and hubs, different forms and materials of the hub later use effect will be different, then different materials of the hub between their use will be what difference? Today by the rider to share for you a brief introduction.
Hello!
Thank you for visiting the official website of Tengcheng machinery. If you have cooperation intention or suggestions, please contact us through the following ways, and we will give you feedback in time. Thank you!
ADD.: Qingmuguan Town, Shapingba District, Chongqing, China.
Tel: +86-13527391290 (Wechat same No.) +86-18983833666
Email: 3124917568@qq.com
© Chongqing Tengcheng Machinery Manufacturing Co., Ltd. All Rights Reserved. 
渝公网安备50010602503568号
- Tel +86-13527391290
- Tel
- Tel +86-18983833666
- Tel
- Whats app
- Feedback
- toTop