Hello, welcome to the official website of Chongqing Tengcheng Machinery Manufacturing Co., Ltd!

Hotline: +86-13527391290  +86-18983833666

TENGCHENG MACHINERY
All Categories >

25

2022

-

05

Maintenance of wheel hub

Author:

When the wheel surface is difficult to remove stains, to choose a professional cleaning agent, this cleaning agent is often able to gently and effectively remove stains, reduce the damage to the aluminum alloy surface. In addition, the wheel itself has a layer of metal maintenance film, so pay special attention to the use of paint brighteners or other abrasive materials. In the process of driving, we should also be careful to avoid "hard injury" caused by scratching the wheel hub. Once there are scratches or deformation, it should be repaired and repainted as soon as possible.
To avoid this phenomenon, the car should be diligent in washing the rims when it is still new. The vehicle driven every day should wash the rims at least once a week. After rinsing with clean water, wash them with sponge and then rinse with plenty of clean water.
If the car has been driving for a period of time, usually not diligent in cleaning and maintenance, and a layer of hard dark brown coking has formed on the rim, then use a stronger rim cleaner.
Remove coking to have resistance, spray on the special cleaning agent, must wait for a while, let the solvent soften after coking, and then with sponge or coarse cloth brush off, and then rinse with water.
Choose a fresh shape to facilitate maintenance
It should be noted that must not be impatient, some serious coking requires three 2. cleaning actions to be completely removed. For those who don't like to maintain their own cars, it is best to choose a "refreshing" shape with a simple and clear appearance, without too many complicated structures, and without a bunch of small screws when buying a car. It is easier to clean.
Here are the specific steps for patching:
1. Check the scars. If there is no injury to the inside of the hub, it can be repaired simply. Use paint diluent to wipe the scars around to remove the dirt.
2. The deepest part of the scratch is difficult to remove the dirt, then it can be thoroughly cleaned with a toothpick.
3. In order to prevent paint from being painted on irrelevant parts by mistake, it is best to carefully stick the adhesive paper around the scar.
4. Tidy up the brush tip and apply decorative paint. After the paint dries, it shrinks slightly. It is better to apply it slightly protruding.
After coating, it will take about a week to dry completely. After drying, use water-resistant paper dipped in soapy water to smooth the surface.
6. After wiping with water-resistant paper, wipe out the light with the mixture, and then wax.
For deeper scars, the focus is to observe whether the metal surface is exposed. If the metal surface cannot be seen, it will not rust, and you can concentrate on painting the finishing paint.
1.1 the point with a pen tip and wait for the paint to dry completely.
Daily maintenance is also indispensable. When the temperature of the wheel hub is high, it should be allowed to cool naturally before cleaning. Never use cold water to clean it. Otherwise, the aluminum alloy wheel hub will be damaged, and even the brake disc will be deformed and the braking effect will be affected. In addition, cleaning the aluminum alloy hub with detergent at high temperature will cause a chemical reaction on the surface of the hub, lose its luster, and affect the appearance.
When the hub is stained with asphalt that is difficult to remove, if the general cleaning agent does not help, try to remove it with a brush, but do not use a hard brush, especially an iron brush, so as not to damage the surface of the hub. Here, to introduce a private car owners to remove asphalt folk prescription: that is, the use of medicinal "live oil" rub, you can get unexpected results, give it a try. If the area where the vehicle is located is wet or close to the beach, the wheel hub should be cleaned frequently to avoid salt corrosion on the aluminum surface. If necessary, after cleaning, the wheel can be waxed and maintained to make it shiny forever.

Previous

None

What does the rim mean?

Next

Previous

None

Next

What does the rim mean?

Latest News

2022-05-25

Maintenance of wheel hub

When the wheel surface is difficult to remove stains, to choose a professional cleaning agent, this cleaning agent is often able to gently and effectively remove stains, reduce the damage to the aluminum alloy surface. In addition, the wheel itself has a layer of metal maintenance film, so pay special attention to the use of paint brighteners or other abrasive materials. In the process of driving, we should also be careful to avoid "hard injury" caused by scratching the wheel hub. Once there are scratches or deformation, it should be repaired and repainted as soon as possible. To avoid this phenomenon, the car should be diligent in washing the rims when it is new, and the car driven every day should be washed at least every week.

2022-05-05

What does the rim mean?

The rim, commonly known as the rim, is a component that installs and supports the tire on the periphery of the wheel, and forms the wheel with the spokes. The rim and spokes may be integral, permanently attached or removable. The hub is a rotating component that connects the wheel and the axle and is responsible for bearing the load between the tire and the axle. The classification of automobile rims is as follows: 1. Deep groove rim: This kind of rim is a whole, and the middle of its section is a deep groove. A flange with a shoulder is used to place the bead of the tire. The shoulder is usually slightly inclined to the middle, and the inclination angle is generally 4 to 6 degrees. The large diameter of the inclined part is called the tire bead and the rim. The diameter of the engagement. The middle of the section is made deep

2022-05-05

The difference between rim and hub

The difference between the rim and the wheel hub is that the rim is the part where the tire is fixedly installed on the wheel, and the wheel hub is the rotating part that connects the wheel and the axle, and is responsible for bearing the load between the tire and the axle. The rim is a part of the wheel hub, which refers to the part in contact with the tire., The wheel is the wheel as usual. The wheel hub is the middle part of the car wheel, that is, the tire is removed. The metal parts in the middle are generally made of aluminum alloy. Our common wheels are all integrated. In a professional description, they are divided into three parts. They are rims, spokes, and discs. This is just a name given to facilitate production in the production process.

2022-05-05

Car rims

The rim of a car, the part of the edge around the wheel. The rim, commonly known as the rim, is the part where the tire is installed around the wheel. When in use, the rim specification of the car is very important. It determines which tires the car can be fitted. The general forms of rims are mainly deep groove rims and flat bottom rims, in addition to open rims, semi-deep groove rims, etc. Deep groove rims are used for cars and light off-road vehicles; flat-bottom rims are used for medium-sized trucks. Open rims are used for medium and heavy off-road vehicles. 1. Deep groove rim: The rim is integrated with a deep groove in the middle of the section. It is mainly used for cars and light off-road vehicles. There is a shoulder flange for placing the outer tire bead, the shoulder is usually slightly facing

2022-05-05

What type of rim is usually used in cars?

What kind of rim is usually used in cars? There are two common ways of rims: deep-groove rims and flat-bottom rims. In addition, there are also split rims and half-groove rims. Deep groove rims are used for cars and light off-road vehicles; flat bottom rims are used for medium trucks; and split rims are used for heavy off-road vehicles. Deep groove rim: this kind of rim is integral, its cross-section in the middle of a deep concave groove, suitable for cars and light off-road vehicles. It has a shouldered boss for placing the bead of the tire. Its shoulder is usually slightly skewed to the middle, and its inclination is generally 5 degrees. The largest diameter of the skew is called the tire bead.

Hello!

Thank you for visiting the official website of Tengcheng machinery. If you have cooperation intention or suggestions, please contact us through the following ways, and we will give you feedback in time. Thank you!

ADD.: Qingmuguan Town, Shapingba District, Chongqing, China.

Tel: +86-13527391290 (Wechat same No.)  +86-18983833666

Email: 3124917568@qq.com

© Chongqing Tengcheng Machinery Manufacturing Co., Ltd. All Rights Reserved. 1渝公网安备50010602503568号

Powered by: www.300.cn

SAF Coolest v1.3.1.1 设置面板GAJSX-AFSE-MSSAE-ZQV

图片ALT信息： Tengcheng Machinery
营业执照及SEO链接： Business License

SVG图标库请自行添加图标，用div包起来，并命名使用